Barry,
Thanks for that info. Now the BIG question: Do I need to create a bend in
the rim of
the clutch sleeve (where the fork rides) to prevent spinning of the sleeve?
As I said
before, the original sleeve had such a bend, but the factory manual does
not mention
it at all.
-Tony
Message text written by Barry Schwartz
>>It appears that the intent
>of this was to prevent rotation of the sleeve against the fork.
***********************************
Yep, that's exactly what that is for
***********************************
> I have talked to a local britich care
>"expert". He does not know of such a thing done to triumph sleeves. He
>does know of other british cars that have various techniques to prevent
>rotation of the sleeve on the fork, though. Anybody see this sort of
thing
>before?
***********************************
Sure have, AMC, Ford, Chevy, and others use this technique-
Barry Schwartz (San Diego) bschwart@pacbell.net
<
|