Fred,
Do you mean the copper bushing that goes between the shaft and the hosing
at the front of the starter (the opposite end than the bendix)? This is the
piece I always found on the garage floor. I managed to get it to stay but
with some Sta-tite. Also when I had the starter re-built, the guy
recommended seating it in the housing and before putting it together to tap
it with a center punch.
Bob
>listers, I seem to always be losing the retaining spacer on my T/R 3-A
>starter and knocking the rear cap off thereby losing a starter due to a
>moving shaft, anyone had this probl;em or how do I solve it, third time
>in 3 years today. I say spacer for lack of knowledge of a better word.
|