Brian,
Much as I hate to admit it I got some clips that we're "pretty close" from the
"HELP!"
section at PEP boys... they're called "shroud" clips. They come 2 in a $4.00
bubble pack,
one's way too big, the other is close enough to use in the middle if you have
the
original clips on the ends...
Malcolm Walker <walker05@camosun.bc.ca> said to try:
...Chris, try Matthews in Birmingham. They might have it for you.
1-800-533-3839
Also (from Bob Roberts <MRobe33243@aol.com>):
Yeah, I know the puppy...There is a guy that I only have a telephone number
for....He buys out old inventories of all sorts fof clips. If you can furnish
him with a sample, He probably can help you. I don't know his name but his
number is: 814-467-9842..Good luck. Let m e know how you did....
I have two close examples left over if you need an example. These HELP versions
are the
correct width and shape, but they're 1" long and the originals are 3/4" -- like
I said,
mixed in with the originals (and slightly modified) they work "OK" -- but I
imagine they
wouldn't hold as tightly as the correct clips if that's all you had.
BTW there's a picture of the correct clip in the TRF TR4-4a glovebox companion
on page
84. Part # 613770 (NLS)
Good luck Brian!
Christopher M.Lillja
Marketing Associate
Princeton University Press
Tel:609 258 4900
Fax:609 258 6305
|