Re: Oxygen sensor setup-

[Joe Worsley <worsley@ebicom.net>]

Joe Worsley wrote:
> 
> Paul Burr wrote:
> >
> > Trevor Boicey wrote:
> > >
> > > Barry Schwartz wrote:
> > > > I?m considering  setting up a fuel/air ratio meter using a digital
> > > > voltmeter (0-1V), and a Bosch oxygen sensor.
> >
> > Barry: save yourself the agro. Go to your "speed shop" type auto parts
> > place. Check the Edelbrock catalog. They have a add on O 2 sensor with a
> > digital readout. It's purpose is to monitor the Lean/rich ratio on carb.
> > cars. Perfect for tuning up a TR.
> 
> Here's a coulpe of sites that have info on the sensor and also how to
> build a display - very simple.
> 
> http://home.sn.no/home/eq:LK/t2000.html
> 
> http://proffa.cc.tut.fi/~eppu/dev/EGO-bar.html
> 
> Joe Worsley
> 80 TR8
> 72 TR6
> Tupelo, MS

Boy I blew that one - I should have tried them again before posting.  I guess 
they have 
gone away - it's been awhile since I accessed them.  If you search for o2 
sensors or 
lambda sensors there is info on the net about them. 

Sorry!!!

Joe worsley