At 05:21 PM 1/17/98 -0500, John McEwen wrote:
>Hi Atwell;
>
>Did you leave some of the goo extruded from the end of the screw-on nozzle
>or did you wipe it off when you finished using the product? I have used
>the "Stuff" for quite a while now and it is important to leave the goo
>sticking out. When you go to use the product again, simply pull out the
>newly-formed plug and it's ready to go. These instructions are on the
>cannister.
>
>John
>
I had left the "plug" sticking out of the screw-on nozzle as you described.
And when I pulled on it, it came out easily as promised. But the
material had solidified down into the can, and the propeelant couldn't push
it out.
Maybe four months was too long between uses.
Atwell
|