Larry,
OK...it's a 79. Still should be Standard bolts and nuts.
Sounds like some DPO has cut in to the trans tunnel, maybe in an attempt to
access the slave cylinder. You might be better off to replace all parts ,
"masonite" (?) and all with a new plastic trans tunnel. When you do, cut the
access hole on the other side to allow for trans fluid topping.
Chris Prugh
72 Spitfar
Morgan Hill, CA
----------
From: Larry Hooven[SMTP:dirty_howi@hotmail.com]
Sent: Sunday, January 11, 1998 10:52 PM
To: triumphs@autox.team.net
Subject: center console 79 spit cal car
in pulling and replacing various parts, i noticed a great big gaping
hole in the driver side cowling inside the car (the masonite???), it
appears that this is part of a masonite piece and not the actual floor
pan, it's up on the side next to the gas (petrol) pedal. am i correct
in thinking this is a masonite type piece that i can form in the skunk
works at work? or is this part of the floor pan/tub. tia.
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
|