If there's someone out there with ready access to
their TR6, I could use some advice concerning
dimensions:
1) I need to know the size of the spare wheel
compartment in the trunk - length, width and depth
(the car is unavailable for measurement at the moment
and I'm trying to figure out the approximate size for
a fuel cell to fit in the well).
2) I'm going to change from the 5.5" wheels to 6"
alloy wheels. Any suggestions on the correct offset
for the best fender clearance? I'm assuming that .25"
additional positive offset would put the inside of the
wider rims in the same position as the stock setup
(and conversely), but I'm sure there are other factors
to consider as well - comments?
Jim Hill
Madison WI
|