Chip Mautz wrote:
> btw - Sears wanted $10/ea for a craftsman flare nut wrench,
> 1/2". Only $8.95 for the 3/8" that I was going to pick up
> also. I mean, come on! For each tool! Anybody got a
> favorite place to pick up a cheap set of SAE flare nut
> wrenches (Home Depot, Ace Hardware, etc.)
The problem is that the single piece cost at Sears is
outrageous (as it is at any other tool shop, for that
matter.) For more reasonable unit prices, you need to
get the set. I think the Sears set of flare-nut wrenches
is a 3-piece set that includes, I think, 5/16"x3/8",
7/16"x1/2", 9/16"x5/8" wrenches for about $13.95. If you
need two of the three wrenches, you'll save $ by buying
the set.
--ken
VTR WWW Maintainer -- http://www.vtr.org
> "Life is too short to drive boring cars"
'70 & '74 TR6 Daily Drivers
(excepting one is stored for winter, and the other
is waiting for a new tranny...)
--
Kenneth B. Streeter | EMAIL: streeter@sanders.com
Sanders, PTP2-A001 |
PO Box 868 | Voice: (603) 885-9604
Nashua, NH 03061 | Fax: (603) 885-0631
|