At 9:24 +1100 20/11/97, DANMAS@aol.com wrote:
>The voltmeter is not polarity sensitive, so hook it up either way. One lead
>goes to ground, and the other goes to any green wire (all green wires are hot
>when the key is on, and they are fused). You do not want the voltmeter to be
>connected to a purple wire (hot all the time, and fused), because it would
>then be on all the time, and place a small but constant drain on the battery.
>
Dan
The wiring colours obviously follow a logical pattern. Could you expand on
what you have told us already? Does the stripe colour indicate anything in
particular?
Regards, Trevor Jordan
74 TR6 CF29281U
|