Joe Curry wrote:
> >
> Actually, the Spit one is 18-878 (p.138 of the latest VB catalog) and
> sells for 34.95, you were looking at the octagonal wrench below.
> However, 2 things pop to mind. [1.] Because of the various sizes that
> one could encounter in the actual 2-ear knockoffs, I can't see how
> anybody can offer one that fils all applications. [2.] If these things
> really work, it seems that one should be able to fabricate his own to
> fit the actual size of his knockoffs, for far less that the 35 bucks.
> (Just MHO)
>
> Joe Curry (previous wire wheel owner who always used a hammer)
Wrong-o Joe.
17-878 is the wood block that surrounds the knock-off that prevents
marring, but still requires the use of a hammer... If you'd look
carefully at page 138, the part number I indicated (18-876 @ $39.95)
*IS* in fact for the two-eared version of the WRENCH that the original
poster had asked about.
You might be well served by carefully reading before you leap to
correction.
Best wishes,
John
--
Come see us on the Web!
http://www.jacksonville.se.mediaone.net/~suchak/home.htm
|