Item Subject: cc:Mail Text
I've used White Post. The fee is $50 per bore size, so if you have a
dual circuit brake m/c, it will be $100. For my TR3, the brass sleeve
was .032" thick; "Billy" at White Post indicated that this had been
derived empirically, and it may be different for other models. Sounds
cheaper than Apple, and you end up with your original bore size.
Regards,
Jim Wallace
'60 TR3 TS81417
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Subject: Re: Brake M/C rebuild kits
Shane F. Ingate wrote:
............the only source of which I could ascertain being Apple.
Apple do resleeve m/c, but for a considerably greater sum (I forget if
it was $160 total, or $160 each for both bores - I suspect the
latter). I chose the home-rebuild path which is pretty
straightforward.
> Shane Ingate in San Diego...........
I believe White Post Restorations in VA bore out then resleeve to
original OD. Anyone out there used them?
|