Henry wrote:
>Carol et al,
>I have my Truechoice catalog in front of me. They do have what
> >looks to
>be the clutch master cylinder used in my TR250's. I think the same is
>used for the TR6... can somebody verify this?
>It is the Girling model 70-200, and is available in bore sizes of .62",
>.70" and .75".
>I have a clutch M/C disassembled in the shop, I will measure it today
>and post my results.
The TR250 and TR6 clutch master cylinders are the same until the 1972 model
year when they reduced the bore of the TR6 master to .70" from .75". I
suspect they did this to make it a little easier to depress the clutch.
Pete Chadwell
|