lewis mckillop wrote:
>
> Back again,
> I know this was discussed earlier but i wasn't receiving any messages
> from the list then...(i just resubscribed, works fine now)...anyway my
> question is "what weight oil to use in the dashpots and how much do i
> put in them?
> thanks again,
> Lew 63 and 67 spit
Lew,
You can spend lots of money on the oil that Vickie Brit etal sell for
the purpose. I have found that Marvel Mystery oil works fine for the
dash pots. Haynes says to fill the damper guide to within a quarter
inch of its rim. When you insert the damper, push it down slowly as the
oil offers resistance.
Joe Curry '63 Spit (___________) fill in the blanks
|