Below is a message I sent earlier this summer. It seem the link was not
functioning. If you are interested check out the picture of the kit at
http://www.cyberbia.com/peterz/tr6/rear_shock_kit/
This link should work, let me know if I am lying.
NOTE: The link in the original message has a different spelling than the
working one. It's the link above which you want.
I have not, and do not plan on installing this kit. I merely pass this
info along as periodically we get a discussion about the merits of a
rear shock conversion for the tr6.
Peter Zaborski
76 TR6 (CF58310 UO)
Calgary AB Canada
> -----Original Message-----
> From: Peter Zaborski
> Sent: Friday, August 15, 1997 10:52 AM
> To: 'TR6 List'
> Subject: tr6 rear shock conversion - new design?
>
> I have just received the latest catalog from British Parts North West
> in Oregon.
>
> They appear to have a conversion kit which I have never seen before.
> It requires no modification to your frame of any sort. You just
> replace your original parts with theirs. Seems quite a good design if
> it really works as advertised.
>
> Cost is listed at $135 including the shocks although I imagine these
> are not Spax or Koni shocks. But it looks like you could just sub
> those for the ones which come with the kit if desired.
>
> For the web enabled, check out http://www.cyberbia.com/~peterz/tr6/.
>
> I have no interest in BPNW ...blah blah blah....
>
> Peter Zaborski
> 76 TR6 (CF58310 UO)
> Calgary AB Canada
>
|