On Fri, 29 Aug 1997, Paul Cormier wrote:
> Barry Schwartz wrote:
> >
> > >> I don't know of anybody that manufactures camber compensators, but it's
> > >> just as easy, and you'll get better results by simply replacing your
> > >> existing spring with a MK4, 1500 swing spring assembly -
> > >
> > ...just change the spring, spring pad and clamp, block off the unused
> > holes in the diff. and your set. You can change the axles, if you want the
> > wider track, and the diff. if you want a stronger rear end but it's not
> > necessary. Shocks are all the same -
>
> Will changing the spring to a 71-80 model improve handling? Is it worth
> it?
Yes, but it's probably best to add the heavier front anti-roll bar from
that same donor '71-'80 as well.
--Andy
* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and *
* 10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register *
* amace@unix2.nysed.gov *
* * * * * * * * * * * * * * * * * * * * * * *
|