Lex,
I have used an old shower curtain with good results. Just cut it to fit
just inside the door panels and cut small "X's" for the door and window
cranks and glue it to the door with spray trim adhesive.
Get the inner door waist seals from The Roadster Factory. Theirs is
correct(fuzzy w/stainless bead).
Good luck,
Jim Davis
Fortson, GA
'75 TR6 CF38690UO
'75 TR6 CF37325U
On Wed, 27 Aug 1997 09:19:23 -0400 Lex Garey
<LGarey@mail.dot.state.nc.us> writes:
>I am working on the doors (replacing waist seals,window channels and
>door panels) of my TR6, and have 2 questions:
>
>1. The 3 water curtain assemblies (plastic sheeting) in the doors are
>about gone. Two of them hang under the inner waist seal, and one is
>attached to the bottom of the window glass channel. I believe these
>are
>no longer available. Does anyone have a suggestion for replacing
>these,
>or a good method of shielding the door panels from water?
>
>2. I got my inner waist seals from Moss, and the 2 are different.
>One is
>fuzzy on top (like on the side of it), and the other has fabric on
>top. To
>further confuse me, the old (original?) one has chrome on top. Which
>is
>right?
> -Lex Garey, Shelby, NC, '74 TR6
>
|