triumphs
[Top] [All Lists]

Re: Frame and rust question

To: Susan Hensley <susan@grotecon.com>
Subject: Re: Frame and rust question
From: "\"Mr. Mike\" Passaretti" <passaretti@sol.med.ge.com>
Date: Wed, 20 Aug 1997 17:12:06 -0500
Cc: Patrick Bitton <pbitton@axess.com>, Triumph Mailing List <triumphs@Autox.Team.Net>
References: <1.5.4.32.19970821001720.0067fc2c@mail.axess.com><33FB69A3.649E@grotecon.com>
>>>>> "Susan" == Susan Hensley <susan@grotecon.com> writes:

    Susan> What I would recommend is the POR-15 treatment.
    Susan> They have stuff called Metal-Ready that prepares
    Susan> the metal for paint, and then you paint it with the
    Susan> POR-15 chassis paint and it is VERY impervious to
    Susan> scratches and dings, plus will not rust again!  You
    Susan> need to wire brush the frame and then spray it with
    Susan> the Metal-Ready.  It coats it and gives the paint a
    Susan> surface to bite into.  Then you can paint with the
    Susan> chassis coat (and they have putty to use to fill in
    Susan> bangs, too).  It is a good solid coating that kills
    Susan> the rust and gives you an excellent finish.

    Susan> I don't have their phone number with me, but can
    Susan> get it if you would like.  I think the company name
    Susan> is something like Restoratives, Inc. and they are
    Susan> in New Jersey.

Check out http://www.por15.com/

                                                -MM


<Prev in Thread] Current Thread [Next in Thread>