If you are putting in your own headliner (any kind of car) remember these
two hints.....
1. You MUST get all the old glue off any surface where the new headliner
will be glued. If you don't the new headliner will fall just like the old
one did. Use a wire brush or wheel if possible to scrape the old glue off
and give a good clean surface.
2. Use a glue rated for high temperature applications. One of the glues
we sell is called HI-TEMP PERFORMANCE and it's the only glue we'll sell for
use on headliner, door panels, etc. The interior (particularly the roof
area) gets extremely hot and any glue not high temp rated will fail (sooner
or later).
Mark
|