B. Dotten wrote:
>
> Listers,
>
> I am once again calling for help. First it was trying to find
> spacers, and this list made it possible to find them(3/4"). Know I need
> Help to find extended 1 3/4" wheel studs to put the stupid spacers on. I
> having as much trouble as I did trying to find the wheel spacers.
> Anybody can supply or knows a supplier, please let me know. And is this
> size the right size I should be getting to put on wheel spacers.
> Thanks to all.
>
> Jere Dotten
> 74' TR6
-----------------------
Just went through this Jere and I found my spacers at Carlise and had no
luck with extended studs from the big three suppliers.
I did purchase mine through Summit ( the racing catalog ) and after two
tries got the right size. They list two types of 7/16" studs and you
need the larger .560 knurl and they are Dorman HPX. Summits number is
1-800-230-3030 and they are pretty helpfull.
Expect to drill (enlarge slightly to provide and interference fit)
I also purchased their race lug nuts with a 45 deg seat. My wheels are
fastwheel steel 8 inch wide wheels and they work well. Your wheel are
aluminum so stick with a normal lug nut. I left my studs at the as
delivered length.
Good Luck
Glenn Franco
71 & 74 TR6's
|