Re: TR6 front wheel spacers

[Paul Burr <tigerpb@ids.net>]

Robert J Carley wrote:
> 
(snip)

> 
> The only bend I can see is in the rod from the steering rack that screws
> into the tie rod end on that side of the car.

> 
> Any suggestions, or wheel spacers?

Bob: if the rack arm is bent, replace it! It only screws onto the end of
the, inside the housing. You may have to remove the rack, but that's not
really to hard to do. This way, you'll restore the proper geonetry on
the right side, eliminating ther source of the problem, rather than
covering it up by using wheel spaces