David Huddleson wrote:
>
> Dear Triumph friends,
>
> We are looking for a bracket for the rear swingarm suspension which
> attaches the radius arm to the frame. We need this "U" shaped bracket
> which holds the forward end of the radius arm to the frame.
>
> We assume (but cannot confirm) that this bracket would be the same as
> similar vintage Triumph Heralds, and likely (?) early Spitfires.
This Bracket is the same on all Heralds, ond 1600 (Sports 6) and 2 Litre
Mk1 Vitesse. The bracket fitted to Spitfires and GT6s is not
interchangeable, and the 2 Litre Mk2 Vitesses were fitted with a
radically changed rear suspension. The parts you need are handed,
original part numbers being 120044 (LH) and 120045 (RH).
I have some of these brackets spare (second hand), so if you can't track
any down in Canada/America, mail me and I can send some over (I don't
want anything for them, just cost of shipping). Hopefully thiugh, you
shouldn't have much difficulty finding them over there,
Regards,
Bill.
--
-------------------------------------------------------------
^================^ This Message sent by:
/ \
/ \ William Davies
__ __________________ __ Total Triumph Enthusiast
/ \ ______ ______ / \
\__/ \ || / \__/
| A \____||____/ A |
| = H H = |
=====U==============U===== 1959 Herald 948 Coupe
\________________________/ 1964 Herald 1200 Saloon
| | | | 1966 Herald 1200 Convertible
|_| |_| 1959 Standard Atlas Pickup
|