Hello Patrick, you wrote :
>Hi I am looking for a TR-6 frame. I am restoring my car sooner then I
>thought. It didn't pass the gouvernment inspection and I noticed the frame
>had 2 welded sections. I plan to restore it on a good foundation and
>therefore need one.
>If you have on or know of someone that has one. Please let me know.
>
>Thank you,
>Patrick Bitton
>Almost a 1971 TR-6
>CC 52138 0
>
Since you did not say whether or not you had already looked in Hemmings
Motor News, or asked any of the usual vendors, I'll have to ask -
Have you ? There are many ads for frame repair, metal patch pieces to
do the repair yourself or at your own mechanics', exchange options, etc..
Fellow listers, if you ask a question here on the list, I assume that
you have already checked your options first, in Hemmings, or in the
catalogs from at least one or two of the `big three' vendors.
If you have already done so, and wish to give fellow listers a shot at
selling something you need, fine, but I would greatly appreciate a
note to that effect in your post. Otherwise, I don't know if you are
`starting from scratch', and using this list as a first resort, or if
you have already gone the usual route, and need help here, as a last
resort ! For the sake of efficiency, to obviate the need for multiple
back-and-forth messages on an already busy list, a few words telling
what you know so far would be very helpful.
Stepping off soap box now, more 2-cent opinions upon request -
Tom Tweed
SW Ohio
'72 TRident 750cc basket case
|