Can't reccomend them (Cannon) either. I think Cannon was sold to
another company, mine are circa 1978. They're chromed and reduce the
ground clearance an inch or more. I shortened the down tubes to
eliminate some of that. The outlet goes straight back under the frame,
which is no good, so I had it bent to head between the frame and under
the transmission. All said, I souldn't use it again.
Quantum Mechanics in CT was selling a cast iron exhaust manifold used in
Britian which is 4 into 2 outlets. Then to a 2 into 1 pipe and then
into your system. I've read posts that the gasket between the manifold
and pipe is a problem (blowouts), but if I ever change systems, this is
my first try!
>Clark
|