Michael Mason wrote:
> O.K. folks! I am at my wits end. Rebuilt the two Zenith Strombergs on
> my TR6.
~snip~
No matter what I do, they
> idle at about 1600 RPM. All linkages unhooked, so can't be that.
~snip~
> Thanks for any words of wisdom or solutions, no matter how
> off-beat...I'll try just about anything. I want this thing on the road!
>
> Cheers,
>
> Michael Mason
Mike,
You said ANY suggestions, so here you go. When I rebuilt the carbs for my
TR 250, I had the same problem. After countless fiddling, I noticed that some-
how the "by-pass valves" were at fault. Since I'm not going to be road worthy
(I am not worthy, etc..:^) ) for a while, I just disonnected and plugged the
vacuum lead to them, and my idle returned to normal. When I get everything
painted and back together, I'm going to find out just what these things do,
and what's wrong with mine...
With just a small hint,
JOE IV
TR 250
WALLINGFORD, CT. USA
> Hi-revvin' in St. Louis
|