In a message dated 97-05-20 12:29:21 EDT, McGaheyRx@aol.com writes:
> Drill out the revets holding them in place - you can revet them back in
place
> later with a cheap pop revet gun.
>
The original snaps on my car are held in place by self tapping aluminum or
chrome screws. Suggest that you do the same when you replace them. Makes
life easier in the future. A little dab of lock-tight would probably also do
if you are nervous - but mine are still there after 31 years. Cheers
Art Kelly '64 TR4 CT33118L (original owner)
|