This obviously didn't get through first time!
----------
> From: Ian Inglis <iani@tcp.co.uk>
> To: triumphs@autox.team.net
> Subject: GT6 mkII/GT6 + window winder mechanism
> Date: 10 May 1997 18:44
>
> I have just replaced my drivers side window winder regulator for the
third
> time, using second hand parts as the mechanism is no longer available.
Most
> of the wear happens on one side of the toothed semi-circlular part and I
> would like to try to either turn this part around or look into getting
one
> remanufactured.
>
> My problem is the pin that holds this assembly in position, it is notched
> at one end to hold the spring in tension, at the other it is just beaten
> into shape to hold the assembly together. Does anyone have any ideas on
> replacing this pin with something serviceable?.
>
> Regards
>
> Ian
> 68 GT6 mkII (rebuilt into re-imported GT6+ shell)
> 69 2000 mkI Saloon
> 76 2500S Estate
|