When I took apart the two rear wheel brake cylinders (TR3A Ts57756), they
appear different. One is marked 3/4 and the other is 5/8. The 5/8 has
dialoy 4 cast into the side and the other has dialoy 3. The 5/8 has a
Girling #304000 cast into the opposite side. the 3/4 has nothing on the
opposite side. One had a flat piston and the other had a slot cut into the
piston. I Suppose bigger is better, but at least one of the rebuild kits
is not going to be right. Is there a good reason I should not change out
the 5/8 for a new 3/4"?
Thanks
Ken Gano
kengano@advant.com
TR3A TS57756 (in pieces)
|