This is a multi-part message in MIME format.
--------------464C56B52B30
Content-Transfer-Encoding: 7bit
I found this after looking...I think it's what you wanted...
Jamie
--
TCOC homepage: http://www.cris.com/~jamiep/
The Gathering Page: http://www.cris.com/~jamiep/gather.html
--------------464C56B52B30
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
>Return-Path: <triumphs-owner@autox.team.net>
Received: from triumph.cs.utah.edu by franklin-fddi.cris.com [1-800-745-CRIS
(voice)]
id XAA12525; Tue, 19 Mar 1996 23:53:53 -0500 (EST)
Errors-To: triumphs-owner@autox.team.net
Received: from localhost (daemon@localhost) by triumph.cs.utah.edu (8.6.12/)
with SMTP id XAA21601; Tue, 19 Mar 1996 23:44:52 -0500
Received: (from majordom@localhost) by triumph.cs.utah.edu (8.6.12/) id
XAA21570 for triumphs-outgoing; Tue, 19 Mar 1996 23:44:29 -0500
Date: Tue, 19 Mar 1996 23:44:20 -0500 (EST)
To: triumphs@autox.team.net
From: yellowbullet@novagate.com (Steve L. Toth)
Subject: Re: TR-6 spin on filter adapter (longish)
Bob,
I've had this setup on my TR250 for about 6 years. I use a Fram PH2825
and it's shorter. It works fine. I think that this is a Ford Fiesta part
no.
Also, FYI, I switched to a Fiesta alternator 3 years ago. It's made by Bosch
and has the same type and size connector! this new alternator is from a
'78 Ford Fiesta (no part number handy-go to Pep Boys) and is 55 amps versus
25 amps
from the original. In 3 plus years, not one alternator related problem.
The only part left on "The Yellow Bullet" that's Lucas, is the starter
and I'm closing in on a replacement.
--------------464C56B52B30--
|