To: | Gary Nafziger <naffy@netins.net> |
---|---|
Subject: | Re: brake line bending |
From: | Paul Burr <tigerpb@ids.net> |
Date: | Fri, 21 Mar 1997 20:38:17 +0000 |
Cc: | triumphs@Autox.Team.Net |
References: | <199703212156.PAA12915@ins1.netins.net> |
Gary Nafziger wrote:(snip) > > Any other thoughts on forming/bending small lines like this? What works for > others? > Gary, Frances Nafziger > Wellman, Iowa > Gary; the best tool I have for bending small, tight bends in tubing came from the Easwood company. The base is a Vice Grip, with a radiused bending channel welded to the top. I've done 90 d. bends that were 1/2" radius without kinking. Check their catalog to see if it's still listed. I paid $20 8 years ago. Sounds pricey, but the payback is a lot less wasted material. |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | No respect?, Bill Wood |
---|---|
Next by Date: | Re: Carpet Installation, scott suhring |
Previous by Thread: | brake line bending, Gary Nafziger |
Next by Thread: | Triumph Heralds, GuyotLeonF |
Indexes: | [Date] [Thread] [Top] [All Lists] |