bill nichol wrote:
>
> Tony Zappa wrote:
> >
> > I am stumped. My brake lights won't work. I have checked the wires,
> > and have a clean wire from the fuse box to the switch and a clean
> > wire from the switch to the lights. I can't find any shorts. The
> > fuse folder contains a 25amp fuse (I have no idea what is supposed to
> > be there, as my schematic doesn't say).
> >
> > Can anyone offer any suggestions? All comments greatly appreciated.
> >
> > Tony Zappa
> > South Africa
> Tony ck your grounds. Lucas, at least in my experience, couldn't make a
> decent ground to save their soul, Check from the bulb holder to the
> frame with an ohmmeter. You should have something in the range of four
> ohmsif you have a lot more then you probably have corrosion somewhere in
> your ground circuit. A good inspection and cleaning should remedie this.
> Also ck any wire that goes into a grommet or terminal of some kind.
> Pull the wire out and ck for corrosion.
> Hey, it worked for me.
> Best of luck
> Bill
> 78Spit
> 80Wedge
|