Robert J Carley wrote:
> 1. Can anyone provide me with the correct torque setting for attaching
> the front shocks of a TR6 to the brackets that attach the shock assembly
> to the lower spring pan?
>From Bentley manual pg 54 (06.3 of factory book):
Damper to spring pan mounting 7/16"UNF 50 to 65 ft-lb
> 2. What is the torque setting for attaching these brackets to the lower
> spring pan (four nuts)?
>From Bentley manual pg 54 (06.3 of factory book):
Shock absorber mounting to spring pan 3/8"UNF 20 to 25 ft-lb
> I can't decipher the factory manual on this one - I think one is 25# and
> one is 65#, but I don't know which is which.
At least you have the right numbers! (And are actually bothering
to use a torque wrench!)
--ken
'74 TR6 Daily Driver, well, at least 6 months each year...
VTR WWW Maintainer -- http://www.vtr.org
--
Kenneth B. Streeter | EMAIL: streeter@sanders.com
Sanders, PTP2-A001 |
PO Box 868 | Voice: (603) 885-9604
Nashua, NH 03061 | Fax: (603) 885-0631
|