Scott
Almost all of the TR6's i've seen have the evaporative loss system in some
sort of disarray. One of the main problems is the plastic tube that runs
from the petrol tank to the carbon canister gets melted from the exhaust.
Mine isn't really hooked up all and the car runs fine.
Aaron Johnson
72 TR6 CC84967
----------
> From: scott suhring <suhring@lancnews.infi.net>
> To: triumphs@autox.team.net
> Subject: TR6 Evaporation Loss Control
> Date: Friday, March 07, 1997 8:47 AM
>
> Advice/Thoughts Needed:
>
> My '70 TR6, Comm. No. CC 51904, does not have the
> entire evaporation loss control as diagramed in
> all the parts catelogs. There is no Carbon
> Canister, it appears that the connector hose was
> cut and "stuffed" with a screw in section after
> leaving the Emission Tank assembly (I haven't removed
> the trunk pannel to see if this is even there).
>
> Without fully understanding this set-up, what do
> I need to be worried about and should/must I
> reinstall this?
>
> Thanks,
>
> Scott Suhring
> Elizabethtown, PA
> '07 TR6
|