Re: British Motor Heritage Suppliers (was Re: TR6 body parts

[Peter Mchugh <Peter.Mchugh@faa.dot.gov>]

     There is at least one other British Motor Heritage supplier...
     
     Motorhead in Fairfax (Merrifield), Virginia
     
     In addition to carefully selecting original or remanufactured parts 
     (Steelcraft, Lucas, etc.) these guys have an unusual collection of new 
     old stock original hard to find parts. 
     
     They have a web site at motorheadx@erols.com (I think...).


______________________________ Reply Separator _________________________________
Subject: British Motor Heritage Suppliers (was Re: TR6 body parts)
Author:  streeter@sanders.com at Internet
Date:    3/5/97 9:56 AM


Henry Frye wrote:
     
> What you want to watch out for is your parts come from from 
> a British Motor Heritage Approved source.  TRF and Moss are. 
> Not sure about VB.  This means they are approved vendors
> and get support from the original manufacturer, FWIW. These 
> approved vendors get things like body parts from either
> original or remanufactured tooling. They are the best parts 
> as far as fit and quality.
     
As far as I am aware, there are only three British 
Motor Heritage Approved suppliers in the USA.  They are 
(in alphabetical order:)
     
     Moss Motors
     The Roadster Factory
     Victoria British
     
The complete British Motor Heritage listing can be found 
on-line at
     
 http://www.ipl.co.uk/MG/herit01a.html
     
     
--ken
VTR WWW Maintainer -- http://www.vtr.org
     
--
Kenneth B. Streeter         | EMAIL: streeter@sanders.com 
Sanders, PTP2-A001          |
PO Box 868                  | Voice: (603) 885-9604 
Nashua, NH 03061            | Fax:   (603) 885-0631