David Brady wrote:
>
> I've been hearing that Hammerite may not be the
> best choice for frame paint because its a bit
> brittle and stones, debris, etc may chip it. Any
> other suggestions on a tough-as-nails paint to
> be used on the chassis?
I have generally heard that the best method
of having the frame, suspension components, etc.,
"painted" is to have them powder-coated. This
results in a pretty finish that is very hard,
wears well, and is permanently attached to the
frame.
I have never had this done myself, but have examined
suspension components and test panels that were
coated with this stuff. I was duly impressed.
--ken
--
Kenneth B. Streeter | EMAIL: streeter@sanders.com
Sanders, PTP2-A001 |
PO Box 868 | Voice: (603) 885-9604
Nashua, NH 03061 | Fax: (603) 885-0631
|