To: | "Triumph list" <triumphs@Autox.Team.Net> |
---|---|
Subject: | TR6 Carb Results |
From: | "Martin Gonzales" <mxgo@ix.netcom.com> |
Date: | Sun, 19 Jan 1997 18:22:34 -0800 |
Replaced existing carb needles with "lean" needles, from Apple Hydraulics and lowered the CO readings on my 73 tr6 to 3.46% (California max. CO is 5.5%) and it runs fine. My HC readings were high, however I run the car at 10 degrees BTDC. I was not smogging the car, I only was checking the new needles. I use 30 weight oil in the dampers. Hopefully this info will help others. Martin Gonzales, 73 TR6 |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: Steel Wheels for TR4/ electonic ign., Dave Herr |
---|---|
Next by Date: | Re: Header for TR-6, robert jones |
Previous by Thread: | Header for TR-6, Peter Firla |
Next by Thread: | GT6 + Sutff, Dave Terrick |
Indexes: | [Date] [Thread] [Top] [All Lists] |