jhdavis6@juno.com wrote:
>
> On Fri, 10 Jan 1997 15:09:46 +0000 Paul Burr <tigerpb@ids.net> writes:
> >Grettings! I phoned Isky cams and talked to them about their z19
> >reground cam, for the TR6. At @$90, it looks to be a good deal. My
> >queston is, if any of you have used this cam, has there been any
> >problems? Do the stock valve springs, etc. function OK, or does the
> >cam
> >put to much strain on them? Also, on a related note, are the Spitfire
> >1500 valve lifters the same as the TR6? The guy at Isky said they only
> >list the 1500 lifters, but that he believed they were interchangable
> >with the TR6. Is this true?
> >
> Paul,
> What are the specs on the z19 cam? I was communicating with a fellow
> lister named Irv who was using an Isky cam on what seemed like a very
> well prepared tr6 but I don't recall what designation it was.
> Comments, Irv?
>
> Jim Davis
> CF38690UO
> CF37325U
>
Hi guys,
Excuse me for butting in here, but I just wanted to tell you that I
have used cams from Ed Iskendarien for the last thirty years.
Give me an Isky over a Crane anytime for TRs.
Regards,
TonyR
"GT6s"
|