I just disassembled my race motor. I have 3 AE pistons/tods marked .040 (over)
left. Everything else was trashed. They measure 86.5 across the top. Are
these .040 over 86 MM pistons? I have another one time race motor (in one
piece) with pistons marked STD on top that seem to measure the same, with 87 MM
liners I.D. Are these stock 87MM pistions? Any help appreciated.
----------
From: Mark J Bradakis <mjb@autox.team.net>
Sent: Saturday, December 21, 1996 12:14 PM
To: triumphs@triumph.cs.utah.edu
Subject: BOUNCE triumphs: Non-member submission from [TR3197@aol.com]
From: TR3197@aol.com
Date: Fri, 20 Dec 1996 20:42:17 -0500
Subject: For Sale/Wanted: AE "STD" (4) Ring Pistons-TR3/4
For Sale/Wanted: I have (3) STD AE VERY low time pistons. I need a 4th piston
to complete the set. Or I will offer to sell these (3) pistons to someone who
can use them.
I also have (1) NOS 83mm piston lanquishing on the shelf. I'm not sure who
would want this piston but you never know.
Wanted: If someone has a set of TR4 valve springs suitable for use with the
ISKY TR-666 cam and Vintage Racing, I would be interested.
rw20232@deere.com or tr3197@aol.com
|