Try John Kipping. See info below:
PARTS SOURCES UK
John Kipping Triumph Spares
(Herald, Vitesse, Spitfire, GT6) - Free Catalogue
Parrots Grove,
421 Aldermans Green Road
Coventry,
CV2 1NP
Phone (01203) 645333
Fax (01203) 645030
>From the US, 011-441-203-645333
They seem pretty helpful and know gearboxes !
Good luck,
*************************************************
* Richard Ceraldi Check it out!
* 71 GT6 MKIII KF166L http://www.exact.com/~gt6mk3/
* Austin, TX e-mail erc004@email.mot.com
*************************************************
________________________________________________________
To: triumphs@autox.team.net@INTERNET; ericst@MICROSOFT.com@INTERNET
From: ericst@MICROSOFT.com@INTERNET on Mon, Nov 25, 1996 5:42 PM
Subject: RE: O/D Mount
Well, I got one response to try Rimmer Bros, which I tried with no luck.
However, I've been told that the only difference between the Type-D
mount and the Type-J mount is that the hole sizes are 3/8 instead of
5/16. Assuming this is true, guess I can just use the type-j mount.
Eric.
>----------
>From: Eric Straub
>Sent: Friday, November 22, 1996 1:22 PM
>To: 'triumphs@autox.team.net'
>Subject: O/D Mount
>
>Does anyone know a supplier who has the type D overdrive mount (The
>factory part # is 134229), This is the rubber mount which attaches the
>O/D to the plate which attaches to the chassis for '67 Spit Mk II.
>
>Neither TRF nor VB carry it (TRF told me it's not being made anymore).
>
>Thanks,
> Eric.
>
|