On Nov 15, 3:26pm, Angelo Graham wrote:
> Just wanted to run this by for opinions.
OK, I'll give you mine, but you probably won't like it <grin>
> In the process of rebuilding all
> of the brake & clutch components in my TR3 some of the kits include
> "Girling" brake grease. The instructions are to apply this to the seals,
> etc when reassembling the components. Is this brake grease compatible with
> DOT 5 (silicone) brake fluid? Should I pass on using this stuff and just
> apply brake fluid to the seals when reassembling?
If it were me, I'd use the Girling red brake grease and pass on using
the DOT 5 silicone fluid and stick with Castrol LMA. In fact, that's
exactly what I do...
John Lye
rjl6n@virginia.EDU
http://avery.med.virginia.edu/~rjl6n/homepage.htm
|