Re: Front Suspension

[mah16@cornell.edu (Marie A Harkins)]

>    With the suspension fully disassembled heat the old bushings with a
>    small torch until they smoke then push them out with a suitably sized
>    C-clamp or vise and 2 appropriate sockets, one smaller than the bushings
>    and one with an ID larger than the bushings. Install the new bushings in
>    the same manner.
>
>
>In the same manner?  Do you mean heat the new bushings until they smoke?
>Gosh, I should try that sometime!
>
OOPS!  -Don't heat the new bushings!-    Yikes!

Bill

mah16@cornell.edu