Anybody have any experience with the "WaxOil" system?
----------
> From: Trmgafun@aol.com
> To: ron_botting@mindlink.bc.ca
> Cc: triumphs@autox.team.net
> Subject: TR3A Rust-Removal
> Date: Thursday, October 31, 1996 5:41 PM
>
> >instead go the usual route of sndblasting followed by etch primer and
then a
> >good frame paint. I used POR 15 with good results.
> >>The POR rep recommends that I skip the etching primer.
>
>
> Ron,
>
> Why not do the welding before dipping? Is the frame that bad? I would
think
> you could grind away the rust in the immediate area for welding, then dip
it
> and paint it.
>
> As far as POR 15 over bare metal? Usually a primer is used first since
it
> has better adhesion to bare metal. The POR 15 seems to be a coating that
is
> not the same as your typical frame paint. It has some sort of rust
> conversion properties in it and is intended (they claim) to be painted
right
> over rust (?) Kind of like the Corroless stuff that the Eastwood Company
> sells. I used that sruff on a truck of mine once and the rust was the
> winner. Although over clean metal, it probably would have been fine.
It's
> been around for a while. They seem to advertise fairly heavily.
>
>
> Scott in Indiana
> 1958 MGA HDA4346400
> 1958 TR3A TS35306L - FOR SALE
> 1968 TR250 CD3520L
>
>
>
>
|