Bitparts@aol.com wrote:
>
> It is a long story how it happened, but my passenger side wire wheel spline
> is loose on the hub. Has been for a bit and the hub bolts are loose in
> their moorings. Question: do I need to replace the hub or can I have the
> needed new bolts welded to the hub to lock them in position.
Bit(?),
You may only have to replace the lug studs (TRF # 114281 @ $3.55 ea)
if the splined holes in the hubs are still decent. I would suggest at
least trying this first, for if you weld them in, future repair will
be impossible.
The studs may be available at a comprehensive (like NAPA) local
parts store, so try that first, to avoid the hassle of 'phone
order with its inheirent time delays.
JOE IV
TR 250
WALLINGFORD, CT. USA
|