| Subject: | Re: Voltage Stabilizer Question |
|---|---|
| From: | Egil Kvaleberg <egilk@sn.no> |
| Date: | Fri, 9 Aug 1996 14:17:22 GMT |
| Apparently-to: | triumphs@autox.team.net |
| Newsgroups: | mail.triumphs |
| Organization: | Siving Egil Kvaleberg AS |
| References: | <v02110100ae30092fadf1@[204.162.173.57]> |
| Xref: | egil mail.triumphs:7032 |
On Thu, 8 Aug 1996, Tomstory wrote: > When I do a voltage reading on the stablizer, I get a steady 12V on the > input, but on the output the reading is very eratic. Should it hold a > steady 10V? It should AVERAGE 10 volts (or thereabouts). If you have a quick acting voltmeter, it will jump up and down. The instruments are slowly acting thermal devices, and will see the average voltage. Egil -- Email: egilk@sn.no Voice: +47 22523641, 92022780 Fax: +47 22525899 Snail: Egil Kvaleberg, Husebybakken 14A, 0379 Oslo, Norway URL: http://www.sn.no/home/egilk/ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Clutch <320A83BE.AC0@mail.concentric.net>, Ken Streeter |
|---|---|
| Next by Date: | Re: TIRES - TR3, R John Lye |
| Previous by Thread: | Voltage Stabilizer Question, Tomstory |
| Next by Thread: | Flasher units, Sholtes IV |
| Indexes: | [Date] [Thread] [Top] [All Lists] |