triumphs
[Top] [All Lists]

Re: Any tips on installing a front 1/4 panel on my

To: triumphs@autox.team.net
Subject: Re: Any tips on installing a front 1/4 panel on my
From: tgentr@rw1.rworld.com
Date: 6 Aug 1996 16:38:38 EDT
MO>Tom,

MO>Are the outer rocker panels bolted on as well? Thanks.

MO>--Jon

No, the rockers, inner and outer, are welded on.  All of the inside
panels are welded as well, but at least most of the outer panels are
relatively painless to remove and replace.

If you are contemplating rocker panel removal, you should know that the
rockers supply some stiffness and support to the chassis.  You will
have to put just a bit of jack pressure under the middle of the frame
during the R/R operation if you hope to get your doors to fit properly
again.

Tom Gentry

<Prev in Thread] Current Thread [Next in Thread>