On Jul 29, 8:48am, Ken Streeter wrote:
> Subject: Re: TR-6 speedo cable routing
>
[snip]
>
> Along these same lines, I've heard tell that there is a "right-angle" drive
> available for the speedo cable on the TR6, so that the speedo cable doesn't
> have to make a 90-degree bend in the confined space between the transmission
> and the tranny tunnel cover/floor pans. My cable takes a sharp bend at that
> point, that I think may be responsible for speedo bounce. (My speedo
> bounce is negligible at 10-30mph, but pretty major at 50+.)
>
> --ken
> '74 TR6 Daily Driver
>
> Kenneth B. Streeter | EMAIL: streeter@sanders.com
> Sanders, PTP2-A001 |
> PO Box 868 | Voice: (603) 885-9604
> Nashua, NH 03061 | Fax: (603) 885-0631
>-- End of excerpt from Ken Streeter
Ken,
I seem to remember that TRF lists a right angle adapter for the
speedo cable, it might be listed for the overdrive model.
Doug Mitchell
|