>
>Can someone post the proper way to fix paint chips??.
>
>
>
>Jeff.A
>
>
>
>
Jeff,
Easiest way I know of is to start with a paint that matches.
Clean any chipped spots very well with a toothbrush and soap and water.
If the chip is to the metal, you may want to use a small spot of primer,
applied with a fine hobby brush.
Use the same method to aply matching paint.
Put on 3 or 4 applications of paint and give it a few minutes between
applications.
Let it set up for a couple of days and wet sand the spots lightly. I
prefer 1000 grit wet/dry paper. Even out the spot. Finish off with white
polishing compound and the wax.
Be patient and take your time.
Best Regards,
Tony
###
|