On Mar 23, 6:33am, rbonilla@holly.ColoState.EDU wrote:
> Subject: 79 spit fuel pump removal
> is there a "catch" to removing the fuel pump on
> the 79' spit? i removed the two nuts, i removed
> the screw, cap, and screen/filter. the unit will
> not "slide" off the block...i have tried rocking the
> car in forth to move the cam ervr so slightly....
> still, it isn't comming off without excessive
> pressure??
> ______
> ___/ __ \______
> _\_\_____) Richard Bonilla, MBA
> (____) Controller, Harsh International
> __ (_____)
> \____(___)
>
> "vote early, vote often"
>-- End of excerpt from rbonilla@holly.ColoState.EDU
Is the pump loose on the block? If not, try tapping in gently with a
soft faced hammer. The gasket cement may be a "permanent" type and
not allowing it to seperate.
Doug Mitchell
|