Need some advice - has anyone encountered a problem with the wires between
the ignition switch and the coil becoming loose and malfunctioning. There
doesn't appear to be any actual "short" - just as the wire (I believe the
white one- from ignition to coil) moves, the power to the coil dies (Ign
light, brake light are on the same circuit) Car will either die, or not
start.
It doesn't appear to be at the circular end that fits into the back of the
Key assembly - I can't tell if it is in the plastic "plug" between the end of
the pig tail and the wiring harness, or if it is further back up in the
harness.
Any ideas as to how I might further diagnose this problem or better yet has
anyone else experienced it and how did they solve it.
TIA
JoeSimcoe
|