Craig writes:
>I recently purchased a 72 GT6 in kit form. (Two previous owners
>started restorations but never finished.) My first task is to
>reassemble the gear box.
>The gear box mainshaft was broken at the driveshaft coupling.
>The previous owner bought a replacement shaft (ordered from
>British Victoria part #2-8013), but it is not quite the same as
>the original. The new shaft has a slightly larger diameter at the driveshaft
>end and the splines that fit into the drive shaft coupling are different.
>The old shaft has 10 splines and the new shaft has 20 splines.
>
>If I can find a drive shaft coupler and a new speedometer drive
>gear to fit on the new shaft I think everything else will work.
>Does anybody know which coupling and speedo gear I need, or
>better yet does anybody have these?
Craig,
I have two GT6 trannies, one from a 68, and one from a 69. It is rather
late in the P.M. right now, but I will check them out first thing Monday
and get back to ya.
Tony R.
69GT6
68GT6
64TR4
TTFN
###
|