>
> Reply to: RE>TR6 on cover of TB+CC
>
> Um, the bump was retained to clear the diff, which mounted right up there.
>
> Scott St. Clair
> Diassembled TR250
>
I was prepared to take your word for it, but I had the back end of
my TR off the ground for some work this afternoon. Seems to me that they
were right - I 've got an inch or so clearance between the topmost edge of
the diff and the plane of the rear floor.
Pete
(Excerpt from first post)
>
> There's nothing in the articles that you probably don't know already of
> course. They did make mention of the presence of the bump in the rear floor
> of the car left-over from the live axle TR's. They thought perhaps it was
> retained for it's stiffening properties.
>
> Enjoy.
>
> Pete
>
>
|